 |
 |
 |
|
|
|
|||||||
| Nokia Программный и Аппаратный ремонт телефонов Nokia |
 |
|
|
Опции темы | Поиск в этой теме |
21.03.2012, 10:54
|
#1 |
|
Junior Member
Регистрация: 20.02.2012
Сообщений: 16
Вес репутации: 16  |
Nokia C5-00.2 RM-745 startup failed contact retailer
startup failed contact retailer nokia c5-00.2 rm-745
вот лог:Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.11988
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic] Initializing box... v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011 Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs Box Serial Number: C000415F 2009, wk32 / 2010, wk01 Initializing security card... Card Serial Number: DC00015A Card Firmware Revision: 0109 Card is activated Box is activated Started box selftests procedure USB Voltage 5,02v PASSED MCU Voltage 3,30v PASSED Core Voltage 1,78v PASSED VBAT Voltage 0,01v PASSED VBAT Voltage 5,04v PASSED Box VPP disabled VPP Voltage 0,04v PASSED Internal Box VPP Enabled VPP Voltage 4,92v PASSED Box VPP disabled VPP Voltage 0,02v PASSED External Box VPP Enabled VPP Voltage 0,02v FAILED - IGNORED - Probably power supply is not connected Box VPP disabled All box selftests passed! Super DCT4 Activation: TRUE XGold/Blackberry Service Running, Credits Left: 98 Avaiable Physical Memory: 1.1023GB Avaiable Virtual Memory: 1.434GB Avaiable Pagefile: 3.1023GB Initializing FBUS... All initialized - Ready to work Scanning avaiable products... Processing C:\Program Files\Nokia\Phoenix\Products\... Found 79 products, Filtering BB5 Products - wait... 30 Products left after filtering. Ready. Retrieving Variants for Product - wait... Product Directory Retrieving Variants for Product RM-364 - wait... 42 Variants Retrieved Retrieving Variants for Product RM-745 - wait... 16 Variants Retrieved Processing pre flash tasks... Pre flash tasks finished, continuing... Processing rm745_081.003_prd.core.fpsx (CMT)... Booting CMT... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00000C35 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 25A00013434857408C7538E8BBF9BECB528D7C72 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_SECURE_ROM_CRC: AC22615B CMT Ready! rm745_081.003_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5 Searching for BootCode: DualLine 32Bit RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.40.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0020005000000031, ST, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0020005000000031, ST, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.40.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Transmission Mode Requested: Bulk USB, Accepted: Bulk USB Box TX2 Data Pin set to: Service Pin 3 Waiting for FUR Client become avaiable... [Nokia USB Flashing Generic]: Port opened OK! FUR Avaiable! Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Overriding VPP Setting, USB can't use VPP Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 5F18D62F8F3D105EEFB6633F44614F8C6DCCA7E8 Sending Certificates... Certificates OK Partitioning... Partitioning OK Started group flash erase EraseArea[0,CMT]: 0x00020000-0x0003FFFF, ONENAND EraseArea[0,CMT]: 0x00060000-0x004DFFFF, ONENAND EraseArea[0,CMT]: 0x008E0000-0x0D3BFFFF, ONENAND Erase Partition (CMT) Waiting 320s for erasure finish... Erase taken 3.354s Writing all blocks... Initializing TurboCache... TurboCache Loaded! Writing CMT ADA Certificate... Writing CMT KEYS Certificate... Writing CMT PRIMAPP Certificate... Writing CMT RAP3NAND Certificate... Writing CMT SOS+PMML Certificate... Writing CMT PASUBTOC Certificate... Writing CMT PAPUBKEYS Certificate... Writing CMT GENIO_INIT Certificate... Writing CMT SOS*UPDAPP Certificate... Writing CMT SOS*DSP0 Certificate... Writing CMT LDSP Certificate... Writing CMT SOS*ISASW Certificate... Writing CMT SOS+CORE Certificate... Writing CMT SOS+ROFS1 Certificate... Programming Status OK! All blocks written OK! Time taken 15.959s Flashing Speed: 51336,22 kBit/S Processing rm745_081.003_prd.core.fpsx (APE)... Processing rm745_081.003_05.01_Russian_prd.rofs2.fpsx (CMT)... rm745_081.003_05.01_Russian_prd.rofs2.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5 PAPUBKEYS Hash for CMT: 5F18D62F8F3D105EEFB6633F44614F8C6DCCA7E8 Sending Certificates... Certificates OK Started group flash erase EraseArea[0,CMT]: 0x07C40000-0x0BD3FFFF, ONENAND Waiting 320s for erasure finish... Erase taken 0.609s Writing all blocks... Initializing TurboCache... TurboCache Loaded! Writing CMT SOS+ROFS2 Certificate... Programming Status OK! All blocks written OK! Time taken 7.238s Flashing Speed: 57541,54 kBit/S Processing rm745_081.003_05.01_Russian_prd.rofs2.fpsx (APE)... Processing rm745_081.003_C00.01_DEFAULT_prd.rofs3.fpsx (CMT)... rm745_081.003_C00.01_DEFAULT_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5 PAPUBKEYS Hash for CMT: 5F18D62F8F3D105EEFB6633F44614F8C6DCCA7E8 Sending Certificates... Certificates OK Started group flash erase EraseArea[0,CMT]: 0x0BD40000-0x0D3BFFFF, ONENAND Waiting 320s for erasure finish... Erase taken 0.219s Writing all blocks... Initializing TurboCache... TurboCache Loaded! Writing CMT SOS+ROFS3 Certificate... Programming Status OK! All blocks written OK! Time taken 0.140s Flashing Speed: 284,40 kBit/S Processing rm745_081.003_C00.01_DEFAULT_prd.rofs3.fpsx (APE)... Processing rm745_081.003_U001.000_prd.uda.fpsx (CMT)... rm745_081.003_U001.000_prd.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5 PAPUBKEYS Hash for CMT: 5F18D62F8F3D105EEFB6633F44614F8C6DCCA7E8 Sending Certificates... Certificates OK Started group flash erase EraseArea[0,CMT]: 0x0D3C0000-0x1F13FFFF, ONENAND Waiting 320s for erasure finish... Erase taken 5.23s Writing all blocks... Initializing TurboCache... TurboCache Loaded! Programming Status OK! All blocks written OK! Time taken 4.165s Flashing Speed: 18222,98 kBit/S Processing rm745_081.003_U001.000_prd.uda.fpsx (APE)... Processing rm745_ENO_APE_ONLY_11wk02_v0.003.fpsx (CMT)... rm745_ENO_APE_ONLY_11wk02_v0.003.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5 PAPUBKEYS Hash for CMT: 5F18D62F8F3D105EEFB6633F44614F8C6DCCA7E8 Sending Certificates... Certificates OK Started group flash erase EraseArea[0,CMT]: 0x004E0000-0x008DFFFF, ONENAND Waiting 320s for erasure finish... Erase taken 0.78s Writing all blocks... Initializing TurboCache... TurboCache Loaded! Writing CMT SOS*ENO Certificate... Programming Status OK! All blocks written OK! Time taken 0.452s Flashing Speed: 41730,42 kBit/S Processing rm745_ENO_APE_ONLY_11wk02_v0.003.fpsx (APE)... Restarting MCU... All images processed OK! Processing post flash tasks... Setting Factory Defaults... [Nokia C5-00 USB Phonet]: Port opened OK! [Nokia C5-00 USB Phonet]: Port opened OK! [Nokia C5-00 USB Phonet]: Port opened OK! [Nokia C5-00 USB Phonet]: Port opened OK! [Nokia C5-00 USB Phonet]: Port opened OK! Factory defaults OK Reading info... [Nokia C5-00 USB Phonet]: Port opened OK! MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 IMEI Spare 3A75000614195008 IMEI SV 3375000614195018F8000000 PSN 237A3CBAA Product Code 059F0D9 Module Code 0204821 Basic Product Code 059F026 PSD 0000000000000000 LPSN 0 APE SW 081.003 APE Variant 081.003081.003.05.01081.003.C00.01 APE Test rm745_APE_ONLY_ENO_11wk02v0 APE HW 256 APE ADSP 256 RETU 35 TAHVO 00 AHNE 11 HW 9106 RFIC |Vapaus_6.5 | Mikki_1.1 DSP ICPR82_11w16 Failed to read info -> Failed to read SP info Read info thread finished, continuing... Post flash tasks finished! Flashing successfully finished! Booting CMT... CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00000C35 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 25A00013434857408C7538E8BBF9BECB528D7C72 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_SECURE_ROM_CRC: AC22615B CMT Ready! Searching for BootCode: DualLine 32Bit RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.40.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Using NEW BB5 FLASHING PROTOCOL Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 If software STUCK HERE with box TX LED lit, that means: USING JAF/UFS CABLES!) 2. Your cable is not TX2 Enabled! 3. Transmission error occured, try again In either cases, you need to reconnect your box from USB. FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0020005000000031, ST, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0020005000000031, ST, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.40.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 5F18D62F8F3D105EEFB6633F44614F8C6DCCA7E8 APE Boot skipped on user request Flashbus Write baud set to 5.0Mbits Restarting MCU... MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 IMEI Spare 3A75000614195008 IMEI SV 3375000614195018F8000000 PSN 237A3CBAA Product Code 059F0D9 Module Code 0204821 Basic Product Code 059F026 PSD 0000000000000000 LPSN 0 RETU 35 TAHVO 00 AHNE 11 HW 9106 RFIC |Vapaus_6.5 | Mikki_1.1 DSP ICPR82_11w16 Failed to read info -> Failed to read SP info BB5 Unlock Started... MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 Warning: Failed to read SP Info, Assuming defaults Simlock Server SIMLOCK SERVER Simlock Key 0000000000000000 Simlock Profile Simlock Key Cnt 0 Simlock FBUS Cnt 0 Reading Security Block... 745_357006041910585_21.03.2012_143855.SecurityBlock.PM" read it... Reading CYC file from phone... Booting CMT... CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00000C35 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 25A00013434857408C7538E8BBF9BECB528D7C72 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_SECURE_ROM_CRC: AC22615B CMT Ready! New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Using NEW BB5 FLASHING PROTOCOL Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 If software STUCK HERE with box TX LED lit, that means: USING JAF/UFS CABLES!) 2. Your cable is not TX2 Enabled! 3. Transmission error occured, try again In either cases, you need to reconnect your box from USB. FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0020005000000031, ST, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0020005000000031, ST, ONENAND Requested Algorithm: XSR 1.6 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! If software STUCK HERE with box TX LED lit, that means: USING JAF/UFS CABLES!) 2. Your cable is not TX2 Enabled! 3. Transmission error occured, try again In either cases, you need to reconnect your box from USB. Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "25A00013434857408C7538E8BBF9BECB528D7C72.C000415F" Checking for Rootkey Hash support with selected Unlock Method... Selected Unlock Method: NCK Calculation (new method) Section Not Found (SL3 phone?) BB5 Unlock Started... MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 Warning: Failed to read SP Info, Assuming defaults Simlock Server SIMLOCK SERVER Simlock Key 0000000000000000 Simlock Profile Simlock Key Cnt 0 Simlock FBUS Cnt 0 Reading Security Block... 745_357006041910585_21.03.2012_143905.SecurityBlock.PM" Determining PA Simlock... Booting CMT... CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00000C35 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 25A00013434857408C7538E8BBF9BECB528D7C72 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_SECURE_ROM_CRC: AC22615B CMT Ready! Searching for BootCode: DualLine 32Bit RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.40.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Using NEW BB5 FLASHING PROTOCOL Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 If software STUCK HERE with box TX LED lit, that means: USING JAF/UFS CABLES!) 2. Your cable is not TX2 Enabled! 3. Transmission error occured, try again In either cases, you need to reconnect your box from USB. FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0020005000000031, ST, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0020005000000031, ST, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.40.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 5F18D62F8F3D105EEFB6633F44614F8C6DCCA7E8 APE Boot skipped on user request Flashbus Write baud set to 5.0Mbits Restarting MCU... Determined PA Simlock: PA_SIMLOC30 BB5 Unlock Failed -> Unsupported PA Simlock BB5 Unlock Started... MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 Warning: Failed to read SP Info, Assuming defaults Simlock Server SIMLOCK SERVER Simlock Key 0000000000000000 Simlock Profile Simlock Key Cnt 0 Simlock FBUS Cnt 0 Reading Security Block... 745_357006041910585_21.03.2012_143919.SecurityBlock.PM" Determining PA Simlock... Booting CMT... CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00000C35 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 25A00013434857408C7538E8BBF9BECB528D7C72 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_SECURE_ROM_CRC: AC22615B CMT Ready! Searching for BootCode: DualLine 32Bit RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.40.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Using NEW BB5 FLASHING PROTOCOL Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 If software STUCK HERE with box TX LED lit, that means: USING JAF/UFS CABLES!) 2. Your cable is not TX2 Enabled! 3. Transmission error occured, try again In either cases, you need to reconnect your box from USB. FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0020005000000031, ST, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0020005000000031, ST, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.40.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 5F18D62F8F3D105EEFB6633F44614F8C6DCCA7E8 APE Boot skipped on user request Flashbus Write baud set to 5.0Mbits Restarting MCU... Determined PA Simlock: PA_SIMLOC30 BB5 Unlock Failed -> Unsupported PA Simlock SX4 Authorization / SD Repair Procedure Started.... "25A00013434857408C7538E8BBF9BECB528D7C72.C000415F" Exists, That is good... MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 Reading Security Block... 745_357006041910585_21.03.2012_143933.SecurityBlock.PM" SX4 Status: Not authorized (74) Started mutual authenthication with card... Receiving Phone Seed 1... Phone Seed 1 Received Sending calculated Data 1, and expecting Seed 2... Calculated Data 1 accepted, Phone Seed 2 Received Sending calculated Data 2 Calculated Data 2 sent, Checking Authorization Status again Authorization successfully finished! Looking for Virgin PM In Database... "Write PM" Button Failed to Write PM -> No file assigned by user SX4 Authorization / SD Repair Procedure Started.... Failed to obtain Phone Unique Data, Will use Server and Original Card MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 SX4 Status: Authorized Disconnected from Cyclone Server SX4 Authorization / SD Repair Procedure Started.... Failed to obtain Phone Unique Data, Will use Server and Original Card MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 SX4 Status: Authorized Disconnected from Cyclone Server SX4 Authorization / SD Repair Procedure Started.... Failed to obtain Phone Unique Data, Will use Server and Original Card MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 SX4 Status: Authorized Disconnected from Cyclone Server SX4 Authorization / SD Repair Procedure Started.... Failed to obtain Phone Unique Data, Will use Server and Original Card MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 SX4 Status: Authorized Disconnected from Cyclone Server SX4 Authorization / SD Repair Procedure Started.... Failed to obtain Phone Unique Data, Will use Server and Original Card MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 SX4 Status: Authorized Disconnected from Cyclone Server SX4 Authorization / SD Repair Procedure Started.... Failed to obtain Phone Unique Data, Will use Server and Original Card MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 SX4 Status: Authorized Disconnected from Cyclone Server SX4 Authorization / SD Repair Procedure Started.... Failed to obtain Phone Unique Data, Will use Server and Original Card MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 SX4 Status: Authorized Disconnected from Cyclone Server SX4 Authorization / SD Repair Procedure Started.... Failed to obtain Phone Unique Data, Will use Server and Original Card MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 SX4 Status: Authorized Disconnected from Cyclone Server SX4 Authorization / SD Repair Procedure Started.... Failed to obtain Phone Unique Data, Will use Server and Original Card MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 SX4 Status: Authorized Disconnected from Cyclone Server SX4 Authorization / SD Repair Procedure Started.... Failed to obtain Phone Unique Data, Will use Server and Original Card MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 SX4 Status: Authorized Disconnected from Cyclone Server Started IMEI Recovery... Booting CMT... CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00000C35 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 25A00013434857408C7538E8BBF9BECB528D7C72 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_SECURE_ROM_CRC: AC22615B CMT Ready! Searching for BootCode: DualLine 32Bit RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.40.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Using NEW BB5 FLASHING PROTOCOL Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 If software STUCK HERE with box TX LED lit, that means: USING JAF/UFS CABLES!) 2. Your cable is not TX2 Enabled! 3. Transmission error occured, try again In either cases, you need to reconnect your box from USB. FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0020005000000031, ST, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0020005000000031, ST, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.40.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 5F18D62F8F3D105EEFB6633F44614F8C6DCCA7E8 APE Subsystem Not Found Flashbus Write baud set to 5.0Mbits Looking NPC for 25A00013434857408C7538E8BBF9BECB528D7C72... Failed to Recovery IMEI -> Range check error MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 IMEI Spare 3A75000614195008 IMEI SV 3375000614195018F8000000 PSN 237A3CBAA Product Code 059F0D9 Module Code 0204821 Basic Product Code 059F026 PSD 0000000000000000 LPSN 0 APE SW 081.003 APE Variant 081.003081.003.05.01081.003.C00.01 APE Test rm745_APE_ONLY_ENO_11wk02v0 APE HW 256 APE ADSP 256 RETU 35 TAHVO 00 AHNE 11 HW 9106 RFIC |Vapaus_6.5 | Mikki_1.1 DSP ICPR82_11w16 Failed to read info -> Failed to read SP info Booting CMT... Failed to Boot CMT -> CMT Not Responding, Phone or Cable problem Prepare phone failed with message -> Failed to Boot CMT Failed to BB5 Downgrade Repair -> Failed to Boot / Prepare Phone SX4 Authorization / SD Repair Procedure Started.... Sending User Abort Signal... Sending User Abort Signal... Sending User Abort Signal... Sending User Abort Signal... Sending User Abort Signal... Sending User Abort Signal... Sending User Abort Signal... Sending User Abort Signal... Sending User Abort Signal... Sending User Abort Signal... Sending User Abort Signal... Sending User Abort Signal... Sending User Abort Signal... Sending User Abort Signal... Sending User Abort Signal... CBUS Request Error -> User abort Sending User Abort Signal... Failed to Authorize SX4 -> Phone not detected Booting CMT... CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00000C35 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 25A00013434857408C7538E8BBF9BECB528D7C72 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_SECURE_ROM_CRC: AC22615B CMT Ready! Searching for BootCode: DualLine 32Bit RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.40.0, Algo: BB5 Flashbus Write baud set to 1.0Mbits Flashbus Read baud set to 98Kbits Using NEW BB5 FLASHING PROTOCOL Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 If software STUCK HERE with box TX LED lit, that means: USING JAF/UFS CABLES!) 2. Your cable is not TX2 Enabled! 3. Transmission error occured, try again In either cases, you need to reconnect your box from USB. FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0020005000000031, ST, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0020005000000031, ST, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported FlashChip 0x00200050 (ST), Size: 512MBytes, VPP: Not Supported RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.40.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit Box TX2 Data Pin set to: Service Pin 3 Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: 5F18D62F8F3D105EEFB6633F44614F8C6DCCA7E8 APE Boot skipped on user request Flashbus Write baud set to 5.0Mbits Restarting MCU... SX4 Authorization / SD Repair Procedure Started.... Failed to obtain Phone Unique Data, Will use Server and Original Card MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 SX4 Status: Not authorized (74) Started mutual authenthication with card... Cyclone Server (1.0.0.690), Cyclone Box Team 2008-2011 - Ready. Receiving Phone Seed 1... Phone Seed 1 Received Sending calculated Data 1, and expecting Seed 2... Calculated Data 1 accepted, Phone Seed 2 Received Sending calculated Data 2 Calculated Data 2 sent, Checking Authorization Status again Authorization successfully finished! Looking for Virgin PM In Database... "Write PM" Button Disconnected from Cyclone Server SX4 Authorization / SD Repair Procedure Started.... Failed to obtain Phone Unique Data, Will use Server and Original Card MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mast |
|
|
|
21.03.2012, 11:00
|
#2 |
|
Member
Регистрация: 02.02.2012
Сообщений: 37
Вес репутации: 22 |
Re: startup failed contact retailer nokia c5-00.2 RM-745
Что было изначально ? Инфо и селф тест можно выкласть ?!
|
|
|
|
|
21.03.2012, 11:16
|
#3 |
|
ADMINISTRATOR
Регистрация: 01.01.2011
Адрес: www.UO5OQ.com
Сообщений: 14,620
Вес репутации: 10   |
Re: startup failed contact retailer nokia c5-00.2 RM-745
Похоже нарушен SIM LOCK
Покажите лог Analyse security.
__________________
ASK->RPL , NCK Коды, Логи и Активации на www.UO5OQ.com |
|
|
|
|
21.03.2012, 11:44
|
#4 |
|
Junior Member
Регистрация: 20.02.2012
Сообщений: 16
Вес репутации: 16 |
Re: startup failed contact retailer nokia c5-00.2 RM-745
работал нормально. после full factory через ufs. случайно выбрал раздел DCT4 а не BB5. там выскочил окошко ASIC еч то нажал yes. настройки все нормально сбросился. после этого надпись нокиа и вырубился. прошил посл.версию и startup failed contact retailer.
вот info MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 IMEI Spare 3A75000614195008 IMEI SV 3375000614195018F8000000 PSN 237A3CBAA Product Code 059F0D9 Module Code 0204821 Basic Product Code 059F026 PSD 0000000000000000 LPSN 0 APE SW 081.003 APE Variant 081.003081.003.05.01081.003.C00.01 APE Test rm745_APE_ONLY_ENO_11wk02v0 APE HW 256 APE ADSP 256 RETU 35 TAHVO 00 AHNE 11 HW 9106 RFIC |Vapaus_6.5 | Mikki_1.1 DSP ICPR82_11w16 Failed to read info -> Failed to read SP info вот анализ сек. Started Phone Security Analysis... MCU Version V ICPR82_11w16.3.6 MCU Date 03-10-11 Product RM-745 (Nokia RM-745) Manufacturer (c) Nokia IMEI 357006041910585 Mastercode 5366525763 Reading Security Block... Security block OK and saved to "RM-745_357006041910585_21.03.2012_154510.SecurityBloc k.PM" Step 1 : Testing SIMLOCK -- SIMLOCK PROBLEM -- Phone have failed SIMLOCK Test, that means Simlock Area is DAMAGED! To repair simlock area, Select Unlock method : "RPL CALCULATION", And then click DIRECT UNLOCK. SL Area will be re-formatted. -- SIMLOCK PROBLEM -- Step 2 : Testing SECURITY SECURITY SEFLTEST PASSED OK! Step 3 : Analyzing Security Block "25A00013434857408C7538E8BBF9BECB528D7C72.C000415F " Exists, That is good... Checking SUPERDONGLE... SUPERDONGLE FOUND AND CHECKSUM OK! PASSED! Checking SIMLOCK... Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?) Checking MCU&DSP TIMESTAMPS... MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED! Checking CMLA KEYS... CMLA KEYS FOUND AND CHECKSUM OK! PASSED! Checking ECC KEYS... ECC KEYS FOUND AND CHECKSUM OK! PASSED! Checking DIV KEYS... DIV KEYS FOUND AND CHECKSUM OK! PASSED! Analyze finished! |
|
|
|
|
21.03.2012, 11:48
|
#5 |
|
Member
Регистрация: 02.02.2012
Сообщений: 37
Вес репутации: 22 |
Re: startup failed contact retailer nokia c5-00.2 RM-745
Сим лок зона повреждена. Если нет бекапов, то наверняка заказ рпл.
|
|
|
|
|
21.03.2012, 11:50
|
#6 |
|
Junior Member
Регистрация: 20.02.2012
Сообщений: 16
Вес репутации: 16 |
Re: startup failed contact retailer nokia c5-00.2 RM-745
может у вас PM есть для него. раньше с помощью вашего PMа восстоновил N79 startup failed contact retailer. может и с ним надо так сделать???
|
|
|
|
|
21.03.2012, 12:02
|
#7 | |
|
ADMINISTRATOR
Регистрация: 01.01.2011
Адрес: www.UO5OQ.com
Сообщений: 14,620
Вес репутации: 10 |
Re: startup failed contact retailer nokia c5-00.2 RM-745
Цитата:
Если Cyclone сохранил бэкап SLD, то опробуйте сделать это Если это не поможет, то смело заказывайте RPL Вы можете скачать PM из нашего Файловый архив ==> Nokia BB5 файлы PM но в данном случае PM не поможет.
__________________
ASK->RPL , NCK Коды, Логи и Активации на www.UO5OQ.com |
|
|
|
|
|
21.03.2012, 12:09
|
#8 |
|
Junior Member
Регистрация: 20.02.2012
Сообщений: 16
Вес репутации: 16 |
если я не ошибаюсь это бекапы
[IMG]C:\Users\Эрик\Desktop\Безымянный.jpg[/IMG] вот ссылка http://foto.mail.ru/mail/ios5.1/_myphoto/3.html# |
|
|
|
|
21.03.2012, 12:18
|
#9 | |
|
ADMINISTRATOR
Регистрация: 01.01.2011
Адрес: www.UO5OQ.com
Сообщений: 14,620
Вес репутации: 10 |
Re: Nokia C5-00.2 RM-745 startup failed contact retailer
Цитата:
Посмотрю что в них есть и скажу помогут ли они восстановить SLD
__________________
ASK->RPL , NCK Коды, Логи и Активации на www.UO5OQ.com |
|
|
|
|
|
21.03.2012, 12:23
|
#10 |
|
Junior Member
Регистрация: 20.02.2012
Сообщений: 16
Вес репутации: 16 |
Re: Nokia C5-00.2 RM-745 startup failed contact retailer
вот бекапы
|
|
|
|
|
21.03.2012, 13:04
|
#11 | |
|
ADMINISTRATOR
Регистрация: 01.01.2011
Адрес: www.UO5OQ.com
Сообщений: 14,620
Вес репутации: 10 |
Re: Nokia C5-00.2 RM-745 startup failed contact retailer
Цитата:
Вот как выглядит нормальное, НЕповреждённое 120 поле PM:[120]
0=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 1=78584DCC3216ECF981D2BDE6FB5B1FDBA234579764328331C71029802E7AAF35F5847A03968079828439CA69EB0C1F19FC5C9AD787870024EDA540D2E7C4D0F958233F0098C4637FB8720E30715BEA0982608DC3F9809CBC174EED396D3CCB350186E27C1163BB4B3A55202877A4E5D6FC46DA9C3286A4F4F0BE2DF4C481A32616C8255351A8A01D042747ABB1375CE834D3B45FFD0CA22ECBA2EBB34889FB5A 2=56A90F65689A260F0907AEEE5DB31381094331FCDDA7240DB53BF79E7ADD4F78C737DFF3D89037942BD389C5148672B0BEE7021370C56CABA904C2BC4F79034679090A5138914E1183E027D25338F526894B0D7361D54C03B66730A059AFA2F36840161F1E5DE3307F2C98C3B62BF6A31F7F032C9932789CB1566947498614510100 3=00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 Вот как выглядит 120 поле PM из вашего Бэкапа:[120]
0=1D8C63A978E15547 1=76B7B75E92D26B11 2=70768FB3AF1702D5 3=A0
__________________
ASK->RPL , NCK Коды, Логи и Активации на www.UO5OQ.com |
|
|
|
|
|
21.03.2012, 13:06
|
#12 |
|
Junior Member
Регистрация: 20.02.2012
Сообщений: 16
Вес репутации: 16 |
Re: Nokia C5-00.2 RM-745 startup failed contact retailer
все понятно! спасибо! буду проц менять.
|
|
|
|
|
21.03.2012, 13:46
|
#13 | |
|
ADMINISTRATOR
Регистрация: 01.01.2011
Адрес: www.UO5OQ.com
Сообщений: 14,620
Вес репутации: 10 |
Re: Nokia C5-00.2 RM-745 startup failed contact retailer
Цитата:
__________________
ASK->RPL , NCK Коды, Логи и Активации на www.UO5OQ.com |
|
|
|
|
|
21.03.2012, 15:52
|
#14 |
|
Moderator
Регистрация: 15.02.2012
Адрес: Хасавюрт, Дагестан
Сообщений: 398
Вес репутации: 197  |
Re: Nokia C5-00.2 RM-745 startup failed contact retailer
Он ведь сам увалил тело и при наличии пары, самому себе дешевле заменить пару, чем встревать на 36 usd
|
|
|
|
