Скрытый текст

darkzerro · 31.03.2011, 06:33

Вообщем такая история, принесли телефон с затертой симлок-зоной, моргалик, при этом ИМЕЙ в норме. Заказали RPL, прописали и отдали клиенту. Через пару дней телефон снова пришел к нам только уже с IMEI 12345**** и прошивкой от N8. Телефон шьется, инфа читается, но в локал не заходит и при востановлении IMEI ошибка. Логи прикладываю, из боксов MX-KEY, MT-BOX, UFS. Понятно, что нужно полностью стереть и далее по стандартной процедуре. Только вот стереть не знаю как на C7 это сделать.

Лог MX-KEY:

Скрытый текст

Scan:
Phone Type: RM-596 (Nokia N8-00)
SW Version: V 92PS1_10w34.3 10-09-10 RM-596 (c) Nokia
Imei plain: 12345610654321-?
Language Pack:
- not available.

SIMLOCK invalid!
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!

Imei plain is invalid !!!
SIMLOCK_DATA corrupted!

Запись RPL:
Imei: 355379********
CMT Data :
SYSTEM ASIC ID: 000000030000022600010007600C192102031104 [RAPU ver: 1.1]
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 26A00018DCA80344A65D11312E62386FE3AEEA0A
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 9.50.0 revision: 3.0 size: 0x3A40
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
New Protocol is not supported for the current interface (UFS_USB V2.8 (c) SarasSoft 2007.).
Please select correct loader version from 'Config' menu !
Updating SIMLOCK...error 0x17
Updating SUPERDONGLE_KEY ...OK
Updating CMLA_KEY...OK
Updating WMDRM_PD...OK

Phone Type: RM-596 (Nokia N8-00)
SW Version: V 92PS1_10w34.3 10-09-10 RM-596 (c) Nokia
Imei plain: 12345610654321-?
Language Pack:
- not available.

SIMLOCK invalid!
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!

Imei plain is invalid !!!
SIMLOCK_DATA corrupted!

MT-BOX не могу записать RPL:
Phone is in: RF Innactive mode
Model: RM-596 ( N8-00)
V 92PS1_10w34.3/10-09-10/RM-596 (c) Nokia
Production serial number 0
Module code
Basic production code
Flash code
Order number
Long production SN 0
MCU SW V 92PS1_10w34.3/10-09-10/RM-596/(c) Nokia
PCI
RFIC |Alli_4.3.4
DSP TB92PS1_10w34.1
Retu 40
Tahvo 00
IMEI: 12345610654321?
Unable to measure VPP
Using Tx2 Data line.
Boot...
Trying boot BB5 phone...

RAPUv11_2nd.fg
Failed to recieve transmition mode from phone
boot failed
Command reset failed, using HW switch.
Phone Type: BB5

----------------- RPL Restore Certificate Status --------------------
Waiting for 30 seconds for phone TX...
Delay additional 3 seconds
============= Set FBus mode for info =============
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Phone is in: Unknown mode
NO SERIAL COMMUNICATION WITH PHONE
NOT SENDING SIMLOCK AND SUPERDONGLE
CHECK CABLE!

Прошивка только по USB: шьется всеми боксами.
Switched to USB BUS
VPP is DISABLED.
Using Tx2 Data line.
Processing File: RM-675_012.004_79.92_prd.core.fpsx
Boot...
CONNECT PHONE to USB and Power ON phone!
Pooling for phone...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&3304155a&3&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
RAPUv11_2nd.fg
Sending ULO code
RAPUv11_XSR17_alg.fg
Pooling for device removal...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&3304155a&3&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[1066.75 MB]...
erasing RAP [00040000 to 0007FFFF]
erasing RAP [000C0000 to 008BFFFF]
erasing RAP [00DC0000 to 0E97FFFF]
erasing RAP [2E100000 to 3E5FFFFF]
erasing RAP [0E980000 to 2E0FFFFF]
erasing RAP [09F40000 to 0DA7FFFF]
erasing RAP [0DA80000 to 0E97FFFF]
in 6.74s
Flash[126.81 MB]...in 14.88s
* * Processed file in 37.13 seconds
Processing File: RM-675_012.004_234_CV_Russia.01_79.92_prd.uda.fpsx
Boot...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&3304155a&3&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.02s
Flash[78.07 MB]...in 13.38s
* * Processed file in 13.44 seconds
Processing File: RM-675_012.004_04.01_Russian_79.92_prd.rofs2.fpsx
Boot...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&3304155a&3&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.02s
Flash[38.96 MB]...in 4.69s
* * Processed file in 4.74 seconds
Processing File: RM-675_012.004_234.01_CV_Russia_79.92_prd.rofs3.fpsx
Boot...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&3304155a&3&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.02s
Flash[0.02 MB]...in 0.02s
* * Processed file in 0.08 seconds
Restarting device...
Pooling for device removal...
Pooling for device removal...
Device disconnected.
* * * Phone flashing done in 0:55 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
Phone not responding, try to set manually!
Dynamic camera configuration...

после чтение по F-bus

Phone is in: RF Innactive mode
Model: RM-675 ( C7-00)
V 92PS1_10w36.3/27-09-10/RM-675 (c) Nokia
Production serial number 0C1BB2FAA
Module code 0204505
Basic production code 0593582
Flash code
Order number 059D7K9
Long production SN 0
MCU SW V 92PS1_10w36.3/27-09-10/RM-675/(c) Nokia
HW 6011
PCI
RFIC |Alli_4.3.4
DSP TB92PS1_10w36
Retu 40
Tahvo 00
IMEI: 12345610654321?
Unable to measure VPP

Снова запись RPL на прошу С7:

Imei: 35537904******
Updating SIMLOCK...error 0x17
Updating SUPERDONGLE_KEY ...OK
Updating CMLA_KEY...OK
Updating WMDRM_PD...OK
CMT Data :
SYSTEM ASIC ID: 000000030000022600010007600C192102031104 [RAPU ver: 1.1]
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 26A00018DCA80344A65D11312E62386FE3AEEA0A
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 9.50.0 revision: 3.0 size: 0x3A40
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
New Protocol is not supported for the current interface (UFS_USB V2.8 (c) SarasSoft 2007.).
Please select correct loader version from 'Config' menu !

Phone Type: RM-675 (Nokia C7-00)
SW Version: V 92PS1_10w36.3 27-09-10 RM-675 (c) Nokia
Imei plain: 12345610654321-?
Language Pack:
- not available.

This is SL3 phone(Simlock2 format).
- Avoid SW Downgrade & manual erase to this phone !

SIMLOCK invalid!
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!

Imei plain is invalid !!!
SIMLOCK_DATA corrupted!

**UO5OQ** · 31.03.2011, 11:58

Цитата:

Сообщение от darkzerro

... Понятно, что нужно полностью стереть и далее по стандартной процедуре. Только вот стереть не знаю как на C7 это сделать....

Совершенно верно!
Потому и SW не помогает и RPL не пишется.
Но чем его стереть, я тоже пока не знаю

И не встречал Erase файлов для этой модели.
Слышал, что ATF Box хорошо и правильно стирает.
Так же могу посоветовать обратиться к одному из разработчиков прогаммы BEST, камараду JayDi, он умеет изготавливать Erase файлы для различных моделей.

31.03.2011, 06:33	#1
darkzerro Junior Member Регистрация: 31.03.2011 Сообщений: 3 Вес репутации: 0	Nokia C7 не пишет RPL Вообщем такая история, принесли телефон с затертой симлок-зоной, моргалик, при этом ИМЕЙ в норме. Заказали RPL, прописали и отдали клиенту. Через пару дней телефон снова пришел к нам только уже с IMEI 12345** и прошивкой от N8. Телефон шьется, инфа читается, но в локал не заходит и при востановлении IMEI ошибка. Логи прикладываю, из боксов MX-KEY, MT-BOX, UFS. Понятно, что нужно полностью стереть и далее по стандартной процедуре. Только вот стереть не знаю как на C7 это сделать. Лог MX-KEY: Скрытый текст Scan: Phone Type: RM-596 (Nokia N8-00) SW Version: V 92PS1_10w34.3 10-09-10 RM-596 (c) Nokia Imei plain: 12345610654321-? Language Pack: - not available. SIMLOCK invalid! SUPERDONGLE_KEY seems to be valid CMLA_KEY seems to be valid WMDRM_PD seems to be valid SIMLOCK_TEST passed SECURITY_TEST failed! Imei plain is invalid !!! SIMLOCK_DATA corrupted! Запись RPL: Imei: 355379****** CMT Data : SYSTEM ASIC ID: 000000030000022600010007600C192102031104 [RAPU ver: 1.1] EM0 ID: 00001040 EM1 ID: 00001030 PUBLIC ID: 26A00018DCA80344A65D11312E62386FE3AEEA0A ASIC MODE ID: 00 ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B ROM ID: E693EF0DAC22615B SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 9.50.0 revision: 3.0 size: 0x3A40 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104 New Protocol is not supported for the current interface (UFS_USB V2.8 (c) SarasSoft 2007.). Please select correct loader version from 'Config' menu ! Updating SIMLOCK...error 0x17 Updating SUPERDONGLE_KEY ...OK Updating CMLA_KEY...OK Updating WMDRM_PD...OK Phone Type: RM-596 (Nokia N8-00) SW Version: V 92PS1_10w34.3 10-09-10 RM-596 (c) Nokia Imei plain: 12345610654321-? Language Pack: - not available. SIMLOCK invalid! SUPERDONGLE_KEY seems to be valid CMLA_KEY seems to be valid WMDRM_PD seems to be valid SIMLOCK_TEST passed SECURITY_TEST failed! Imei plain is invalid !!! SIMLOCK_DATA corrupted! MT-BOX не могу записать RPL: Phone is in: RF Innactive mode Model: RM-596 ( N8-00) V 92PS1_10w34.3/10-09-10/RM-596 (c) Nokia Production serial number 0 Module code Basic production code Flash code Order number Long production SN 0 MCU SW V 92PS1_10w34.3/10-09-10/RM-596/(c) Nokia PCI RFIC \|Alli_4.3.4 DSP TB92PS1_10w34.1 Retu 40 Tahvo 00 IMEI: 12345610654321? Unable to measure VPP Using Tx2 Data line. Boot... Trying boot BB5 phone... RAPUv11_2nd.fg Failed to recieve transmition mode from phone boot failed Command reset failed, using HW switch. Phone Type: BB5 ----------------- RPL Restore Certificate Status -------------------- Waiting for 30 seconds for phone TX... Delay additional 3 seconds ============= Set FBus mode for info ============= Pins: Mbus 1, Box Tx 1, Box Rx 1, Bsi 0 Phone is in: Unknown mode NO SERIAL COMMUNICATION WITH PHONE NOT SENDING SIMLOCK AND SUPERDONGLE CHECK CABLE! Прошивка только по USB: шьется всеми боксами. Switched to USB BUS VPP is DISABLED. Using Tx2 Data line. Processing File: RM-675_012.004_79.92_prd.core.fpsx Boot... CONNECT PHONE to USB and Power ON phone! Pooling for phone... \\?\nmwcd#vid_0421&pid_0106&if_oth#6&3304155a&3&00#{4f919102-4adf-11d5-882d-00b0d02fe381} RAPUv11_2nd.fg Sending ULO code RAPUv11_XSR17_alg.fg Pooling for device removal... Pooling for ADL device... \\?\nmwcd#vid_0421&pid_0106&if_oth#6&3304155a&3&00#{4f919102-4adf-11d5-882d-00b0d02fe381} Erase[1066.75 MB]... erasing RAP [00040000 to 0007FFFF] erasing RAP [000C0000 to 008BFFFF] erasing RAP [00DC0000 to 0E97FFFF] erasing RAP [2E100000 to 3E5FFFFF] erasing RAP [0E980000 to 2E0FFFFF] erasing RAP [09F40000 to 0DA7FFFF] erasing RAP [0DA80000 to 0E97FFFF] in 6.74s Flash[126.81 MB]...in 14.88s * * Processed file in 37.13 seconds Processing File: RM-675_012.004_234_CV_Russia.01_79.92_prd.uda.fpsx Boot... \\?\nmwcd#vid_0421&pid_0106&if_oth#6&3304155a&3&00#{4f919102-4adf-11d5-882d-00b0d02fe381} Erase[0.00 MB]... in 0.02s Flash[78.07 MB]...in 13.38s * * Processed file in 13.44 seconds Processing File: RM-675_012.004_04.01_Russian_79.92_prd.rofs2.fpsx Boot... \\?\nmwcd#vid_0421&pid_0106&if_oth#6&3304155a&3&00#{4f919102-4adf-11d5-882d-00b0d02fe381} Erase[0.00 MB]... in 0.02s Flash[38.96 MB]...in 4.69s * * Processed file in 4.74 seconds Processing File: RM-675_012.004_234.01_CV_Russia_79.92_prd.rofs3.fpsx Boot... \\?\nmwcd#vid_0421&pid_0106&if_oth#6&3304155a&3&00#{4f919102-4adf-11d5-882d-00b0d02fe381} Erase[0.00 MB]... in 0.02s Flash[0.02 MB]...in 0.02s * * Processed file in 0.08 seconds Restarting device... Pooling for device removal... Pooling for device removal... Device disconnected. * * * Phone flashing done in 0:55 minutes Post Flash serial tunning of phone.... Pooling mode for full factory set... Phone not responding, try to set manually! Dynamic camera configuration... после чтение по F-bus Phone is in: RF Innactive mode Model: RM-675 ( C7-00) V 92PS1_10w36.3/27-09-10/RM-675 (c) Nokia Production serial number 0C1BB2FAA Module code 0204505 Basic production code 0593582 Flash code Order number 059D7K9 Long production SN 0 MCU SW V 92PS1_10w36.3/27-09-10/RM-675/(c) Nokia HW 6011 PCI RFIC \|Alli_4.3.4 DSP TB92PS1_10w36 Retu 40 Tahvo 00 IMEI: 12345610654321? Unable to measure VPP Снова запись RPL на прошу С7: Imei: 35537904****** Updating SIMLOCK...error 0x17 Updating SUPERDONGLE_KEY ...OK Updating CMLA_KEY...OK Updating WMDRM_PD...OK CMT Data : SYSTEM ASIC ID: 000000030000022600010007600C192102031104 [RAPU ver: 1.1] EM0 ID: 00001040 EM1 ID: 00001030 PUBLIC ID: 26A00018DCA80344A65D11312E62386FE3AEEA0A ASIC MODE ID: 00 ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B ROM ID: E693EF0DAC22615B SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 9.50.0 revision: 3.0 size: 0x3A40 Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104 New Protocol is not supported for the current interface (UFS_USB V2.8 (c) SarasSoft 2007.). Please select correct loader version from 'Config' menu ! Phone Type: RM-675 (Nokia C7-00) SW Version: V 92PS1_10w36.3 27-09-10 RM-675 (c) Nokia Imei plain: 12345610654321-? Language Pack: - not available. This is SL3 phone(Simlock2 format). - Avoid SW Downgrade & manual erase to this phone ! SIMLOCK invalid! SUPERDONGLE_KEY seems to be valid CMLA_KEY seems to be valid WMDRM_PD seems to be valid SIMLOCK_TEST passed SECURITY_TEST failed! Imei plain is invalid !!! SIMLOCK_DATA corrupted!