![]() |
|
|
Nokia Программный и Аппаратный ремонт телефонов Nokia |
![]() |
|
Опции темы | Поиск в этой теме |
![]() |
#1 |
Senior Member
Регистрация: 26.04.2012
Сообщений: 100
Вес репутации: 31 ![]() |
![]()
лог mx
Скрытый текстPhone type: RM-643 (C1-02)
SW version: V 06.15 25-11-11 RM-643 (c) Nokia Imei plain: 35433404330631-0 Product code: 059B0C6 Battery voltage: 3544 mV, current: 0 mA Cellular system: GSM ASIC ID: 0x0000, type: 11 Ppm Id: I Language Pack: - not available. SIMLOCK_DATA corrupted! best Скрытый текстConnect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Read and Check phone data... ---------------------- RAP_BOOT: 0000000000000000 RAP_PUB: 0000000000000000000000000000000000000000 CMT_ROOT: 00000000000000000000000000000000 RAP_PAPUB: 0000000000000000000000000000000000000000 ---------------------- Live Test Ok! ---------------------- CNT sector : 128 kb ------------------------ INFINEON : SDData is not present (It is Ok) CMLA Key status : read data error SimLock status : SimLock Damaged!!!!! ![]() - > Do REPAIR SL if it SL2/SL phone, if SL3 - Help Only Backup Or RPL Security status : Security is Ok ----------------------- PA_SimLock Version : PA_SL3 phone , SP_CODE_LEN : 15 я так понимаю нужен rpl? ни разу не заказывал-помогите советом скажите как считать ask? Последний раз редактировалось jan478; 26.12.2012 в 15:11. |
![]() |
![]() |
#2 |
Senior Member
Регистрация: 26.04.2012
Сообщений: 100
Вес репутации: 31 ![]() |
![]()
прошивка best
Скрытый текстcard found: S/N A304:0120
registered to: 00A304C3E2 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Read and Check phone data... ---------------------- RAP_BOOT: 0000000000000000 RAP_PUB: 0000000000000000000000000000000000000000 CMT_ROOT: 00000000000000000000000000000000 RAP_PAPUB: 0000000000000000000000000000000000000000 ---------------------- Live Test Ok! ---------------------- CNT sector : 128 kb ------------------------ INFINEON : SDData is not present (It is Ok) CMLA Key status : read data error SimLock status : SimLock Damaged!!!!! ![]() - > Do REPAIR SL if it SL2/SL phone, if SL3 - Help Only Backup Or RPL Security status : Security is Ok ----------------------- PA_SimLock Version : PA_SL3 phone , SP_CODE_LEN : 15 Reboot.... Connection opened successfully Waiting for communication response... BootRom : Verify Error ![]() -> Error answer from BootRom Boot error #1, break ![]() Error on SPR reading ![]() Phone disconected! Connect phone on selected interface... Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Reading ASK request file... Seems it is not standart BB5 phone, read failed ![]() Reading ASK request file... Seems it is not standart BB5 phone, read failed ![]() Reading ASK request file... Seems it is not standart BB5 phone, read failed ![]() Resetting selected items... Operating mode is OK, no need change... Settings Full Factory Defaults... Error When resetting Full factory ![]() Settings Software Upgrade Defaults... Error When setting Software Upgrade Defaults ![]() Settings Service Centre Defaults... Error When setting Service Centre defaults ![]() Settings Production Tune Defaults... Error When settinng Production Tune defaults ![]() Settings User Data Defaults... Error When setting User Data defaults ![]() Settings Leave Factory defaults... Error When setting Leave Factory Defaults ![]() Elapsed: 00:00:01 Phone disconected! Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Core : v1.59 , BB5XG FlashEngine : v3.8 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm643__06.15.mcusw PPM : rm643__06.15.ppm_i CNT : rm643__06.15.image_i_059B0C6 Flashing phone now... Check files done... -> SWversion check skipped : Manual mode selected Backup CRT308 data... CRT308 Backup Created Check communication with phone.... ADL req restart Communication verify done... Preparing... Check communication with phone... Batery voltage : 3578 mV -> Batery voltage less, than 3,8V (3578mV). Continue at user risk SL3 Simlock read (XGOLD) ... Ok Reboot.... Connection opened successfully DBG : F00A1FB300020303010100FF CPUID : XGOLD 213 2nd boot Ok, 01 2nd ready, AA Sending Algo Algo sent Ok BL : Quantum_Bootloader_2.5_M1S1 Speed accepted, use 6.500.000 FLASHID : 89008289 FLIC conf set, RST set Boot done! Backup enabled, will read all certificates Reading CCC Reading HWC Reading NPC IMEI : 354334043306310 PCcode : 059B0C6 NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... SimLock Data saved... SimLock Key saved... RPL saved : C:\InfinityBox\BEST\Backup\Cert\354334043306310_XG213.rpl ===Flashing [MCU]=== File : rm643__06.15.mcusw Image : rm643__06.15.mcusw_ebl_psi.fls Cert block found, sending.... Cert sent Found 5 region(s) Processing Region 1/5 Erase , Start : 0x40000000 , Len : 0x00020000 Erasing, wait ... Erase done, time : 00:00:00 Write , Start : 0x40000000 , Len : 0x00020000 Flashing , wait ... Region flash done, time : 00:00:00 Processing Region 2/5 Erase , Start : 0x40040000 , Len : 0x00040000 Erasing, wait ... Erase done, time : 00:00:01 Write , Start : 0x40040000 , Len : 0x00040000 Flashing , wait ... Region flash done, time : 00:00:00 Processing Region 3/5 Erase , Start : 0x40080000 , Len : 0x00020000 Erasing, wait ... Erase done, time : 00:00:00 Write , Start : 0x40080000 , Len : 0x00020000 Flashing , wait ... Region flash done, time : 00:00:00 Processing Region 4/5 Erase , Start : 0x400A0000 , Len : 0x00100000 Erasing, wait ... Erase done, time : 00:00:05 Write , Start : 0x400A0000 , Len : 0x00100000 Flashing , wait ... Region flash done, time : 00:00:01 Processing Region 5/5 Erase , Start : 0x40400000 , Len : 0x01800000 Erasing, wait ... Erase done, time : 00:02:15 Write , Start : 0x40400000 , Len : 0x01780000 Flashing , wait ... Region flash done, time : 00:00:36 ===Flashing [PPM]=== File : rm643__06.15.ppm_i Image : package_i.ppm_ebl_psi.fls Cert block found, sending.... Cert sent Found 1 region(s) Processing Region 1/1 Erase , Start : 0x41C00000 , Len : 0x00600000 Erasing, wait ... Erase done, time : 00:00:20 Write , Start : 0x41C00000 , Len : 0x0038735C Flashing , wait ... Region flash done, time : 00:00:04 ===Flashing [CNT]=== File : rm643__06.15.image_i_059B0C6 Image : package_i_059B0C6.image.fls Cert block found, sending.... Cert sent Found 2 region(s) Processing Region 1/2 Erase , Start : 0x42200000 , Len : 0x01C60000 Erasing, wait ... Erase done, time : 00:03:47 Write , Start : 0x42200000 , Len : 0x00BA0000 Flashing , wait ... Region flash done, time : 00:00:16 Processing Region 2/2 Erase , Start : 0x43E60000 , Len : 0x000E0000 Erasing, wait ... Erase done, time : 00:00:07 No write data, skip Flashing done! Total flash time : 00:07:40 Reboot phone now... Reading Phone Info.... Connected phone - C1-02 Software Info: V 06.15 25-11-11 RM-643 (c) Nokia IMEI: 354334043306310 PPM version : V 06.15 25-11-11 RM-643 (c) Nokia I Product code: 059B0C6 Checking... SimLock status : SimLock Damaged!!!!! ![]() Security status : Security is Ok Read Info Done! Checking User Certificates... Total - 39 certs Data exist, skip certificate repair... ===== WARNING ===== Battery voltage is can be not enough for start ===== WARNING ===== AfterFlash operations done ;D Done! Connect phone on selected interface... Elapsed: 00:08:16 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Resetting selected items... Operating mode is OK, no need change... Settings Full Factory Defaults... Set OK! Settings Software Upgrade Defaults... Set OK! Settings Service Centre Defaults... Set OK! Settings Production Tune Defaults... Set OK! Settings User Data Defaults... Set OK! Settings Leave Factory defaults... Set OK! Elapsed: 00:00:02 |
![]() |
![]() |
#3 |
ADMINISTRATOR
|
![]()
Увы, Nokia C1-02 RM-643 на платформе X-Gold.
Телефоны Nokia X-Gold со стёртой SIM LOCK DATA или полностью стёртые, не восстановить на данный момент ничем ![]()
__________________
ASK->RPL , NCK Коды, Логи и Активации на www.UO5OQ.com |
![]() |
Пользователь сказал cпасибо: | vassall (27.12.2012) |
![]() |
#4 |
Senior Member
Регистрация: 26.04.2012
Сообщений: 100
Вес репутации: 31 ![]() |
![]()
ну остается проц менять
|
![]() |