Rd Key

Dili · 16.05.2012, 21:16

Так и не мог восстановить его !
1.)Бекап РПЛ
2.) Полное стирание BEST-ом
3.) Запись SW из полного Nokia SW Installer по INI ...

телефон полностью ВКЛючается и работает несколько минут с IMEI 123456....

4.) Запись бэкапа RM-639_Dili_Repair_RPL
5.) Делаю Rd Key с помощью BEST (интерфейс UFS, Jaf), но не проходит

Rd Key

Read Uniq key data started...

Phone Imei: 355380041927770
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102031104
CMT EM0 ID : 00001051
CMT EM1 ID : 00001060
CMT PUB ID : 1660020C89A80344E1C6B338F3594A8233E0A682
CMT MODE ID : 00
CMT R_HASH : 916F75217F32081248B15C38DFC8E81B
CMT ROM ID : E693EF0DAC22615B

Error finding required loader...

- > USE USB cable for it ;D

Error fetching data...

Read fail...!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Repair SDD тоже не проходит

Repair SDD

Repair SD procedure started...

Phone Imei: 355380041927770
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102031104
CMT EM0 ID : 00001051
CMT EM1 ID : 00001060
CMT PUB ID : 1660020C89A80344E1C6B338F3594A8233E0A682
CMT MODE ID : 00
CMT R_HASH : 916F75217F32081248B15C38DFC8E81B
CMT ROM ID : E693EF0DAC22615B

Error finding required loader...

- > USE USB cable for it ;D

Error fetching data...

Can't read Unique data!

Repair fail...!

Phone disconected!

Connect phone on selected interface...

С USB

Rd Key

Connect phone on selected interface...

Read Uniq key data started...

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
PUBLIC ID: 1660020C89A80344E1C6B338F3594A8233E0A682
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
Fetching data, wait...

- > Reinsert cable and battery, press powerOn button again
- > For X7, E7 - just waiting, near 1 minute
- > When BEST start Search Phone - Press PowerOn if needed

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 1660020C89A80344E1C6B338F3594A8233E0A682
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.48.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.48.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!

TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 23B57C26A0C7A9C34544727AA1D2FC8F3265329C
ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Wait, reconneting...

Дальше Repair SDD

Repair SDD

Repair SD procedure started...

Phone Imei: 355380041927770
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing Super Dongle Key... Ok!
Done!

Local SX4 Auth

Local SX4 procedure started...

Phone Imei: 355380041927770
Key file exists, no need to read...
Step 1...
Step 2...
SX4 Auth fail...
- > Try Check "Custom Keys" checkbox and repeat
- > If SDD original - "Use Server Sx4"

Server SX4

Processing Server SX4 Auth
Checking SDD key...
Check SD : Key is Ok
Operating mode is OK, no need change...
Connecting to server...
Connection error #1
Server not found...
SX4 Auth error

И сного Contact Service

С ATF тоже не получается ...

16.05.2012, 21:16	#8
Dili Member Регистрация: 01.11.2011 Сообщений: 62 Вес репутации: 49	Re: X3-02 RM-639 contact service Так и не мог восстановить его ! 1.)Бекап РПЛ 2.) Полное стирание BEST-ом 3.) Запись SW из полного Nokia SW Installer по INI ... телефон полностью ВКЛючается и работает несколько минут с IMEI 123456.... 4.) Запись бэкапа RM-639_Dili_Repair_RPL 5.) Делаю Rd Key с помощью BEST (интерфейс UFS, Jaf), но не проходит Rd Key Read Uniq key data started... Phone Imei: 355380041927770 Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000030000022600010007600C192102031104 CMT EM0 ID : 00001051 CMT EM1 ID : 00001060 CMT PUB ID : 1660020C89A80344E1C6B338F3594A8233E0A682 CMT MODE ID : 00 CMT R_HASH : 916F75217F32081248B15C38DFC8E81B CMT ROM ID : E693EF0DAC22615B Error finding required loader... - > USE USB cable for it ;D Error fetching data... Read fail...! Phone disconected! Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok Repair SDD тоже не проходит Repair SDD Repair SD procedure started... Phone Imei: 355380041927770 Setting FlashMode FlashMode set Ok 1st boot Ok, C0 CMT part info : CMT ASICID : 000000030000022600010007600C192102031104 CMT EM0 ID : 00001051 CMT EM1 ID : 00001060 CMT PUB ID : 1660020C89A80344E1C6B338F3594A8233E0A682 CMT MODE ID : 00 CMT R_HASH : 916F75217F32081248B15C38DFC8E81B CMT ROM ID : E693EF0DAC22615B Error finding required loader... - > USE USB cable for it ;D Error fetching data... Can't read Unique data! Repair fail...! Phone disconected! Connect phone on selected interface... С USB Rd Key Connect phone on selected interface... Read Uniq key data started... Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000030000022600010007600C192102031104 CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB PUBLIC ID: 1660020C89A80344E1C6B338F3594A8233E0A682 ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B Fetching data, wait... - > Reinsert cable and battery, press powerOn button again - > For X7, E7 - just waiting, near 1 minute - > When BEST start Search Phone - Press PowerOn if needed Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... [BB5 FLASH]: Bootrom Ok! ASIC ID: 000000030000022600010007600C192102031104 CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB EM0 ID: 00001051 EM1 ID: 00001060 PUBLIC ID: 1660020C89A80344E1C6B338F3594A8233E0A682 ASIC MODE ID: 00 ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B ROM ID: E693EF0DAC22615B Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.48.0 Processing RAWLOADER... FLIC : 003000EC Req : XSR 1.6 Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.48.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:02 Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] PAPUBkeys : 23B57C26A0C7A9C34544727AA1D2FC8F3265329C ADL: Close_Session Content: 000300000000010000000100000000 ADL: Reboot Wait, reconneting... Дальше Repair SDD Repair SDD Repair SD procedure started... Phone Imei: 355380041927770 Key file exists, no need to read... Operating mode is OK, no need change... Writing Super Dongle Key... Ok! Done! Local SX4 Auth Local SX4 Auth Local SX4 procedure started... Phone Imei: 355380041927770 Key file exists, no need to read... Step 1... Step 2... SX4 Auth fail... - > Try Check "Custom Keys" checkbox and repeat - > If SDD original - "Use Server Sx4" Server SX4 Server SX4 Processing Server SX4 Auth Checking SDD key... Check SD : Key is Ok Operating mode is OK, no need change... Connecting to server... Connection error #1 Server not found... SX4 Auth error И сного Contact Service С ATF тоже не получается ...