Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 0A4001137BDB03443CBC73B38591EEF8AF935264
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.50.0
Processing RAWLOADER...
FLIC : 006000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.50.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02
ADL: Preparing for write certificates...
Erase NPC... Ok
Writing NPC... Ok
ADL: Writing Flash certs done!
ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
-> No any Flex keys selected, skip flex part
Done!
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia C6-01
Software ver : V 92_11w25.1 01-07-11 RM-601 (c) Nokia
IMEI : 358627040631457
Ape Ver : 022.014
APE Var : 022.014022.014.04.01022.014.00.01
APE ADSP: 256
DSP Ver : 92_11w25
APE Test: 0.063
PPM :
CNT :
Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 40
Tahvo : 00
Batery: 4074 mV
Camera:
CMT BT:
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 358627040631457
IMEI spNet : 3A 85 26 07 04 36 41 05
IMEI svNet : 33 85 26 07 04 36 41 15 F8
Unable to read Lock table...
CRT308 Backup Created
SDD key status : Damaged!!!!!
SimLock status : Damaged!!!!!
Security status : Damaged!!!!!
PA_SL phone
User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method
Done!
Repair SD procedure started...
Phone Imei: 358627040631457
- > Power Off phone, dissconnect it and connect
- > Phone was not powered Off
Can't read Unique data!
Repair fail...!
Repair SD procedure started...
Phone Imei: 358627040631457
- > Power Off phone, dissconnect it and connect
- > Phone was not powered Off
Can't read Unique data!
Repair fail...!
Repair SL procedure started...
Phone Imei: 358627040631457
- > Power Off phone, dissconnect it and connect
- > Phone was not powered Off
Can't read Unique data!
Repair fail...! ( SL3 phone? )
Checking StartUp data ...
-----------------------
SDD Key status : SDData Damaged!!!!!
- > Do REPAIR SDD , Local SX4 if needed
SimLock status : SimLock Damaged!!!!!
- > Do REPAIR SL if it SL2/SL phone, if SL3 - Help Only Backup Or RPL
Security status : Security Damaged!!!!!
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL phone detected
Done!
Repair SD procedure started...
Phone Imei: 358627040631457
- > Power Off phone, dissconnect it and connect
- > Phone was not powered Off
Can't read Unique data!
Repair fail...!