Вот логи.

sohib · 05.04.2012, 18:13

Всем привет! Подскажите пожалуйста в чем может быть проблема? Во первых стер тело куклоном потом прошил, телефон включился значит нормально стер. Потом заливаю Rpl Bestom потом залил рм но все равно белый фон.

Вот логи.

Product Code: 059D9Z9
Language Pack:
- not available.

Detected as PA_SL3 phone.
- Avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed

Imei net: 35xxxxxxxxxxxxx
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
Вот лог Best
Ape Ver : 025.007
APE Var : 025.007025.007.04.01025.007.00.01
APE ADSP: 256
DSP Ver : 92_11w36
APE Test: rm675_ENO_v_0.0491
PPM :
CNT :
Product SN : 0
Product code : 059D9Z9
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 40
Tahvo : 00
Batery: 4658 mV
Camera:
CMT BT:
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 35xxxxxxxxxxxxx
IMEI spNet : 3A 55 69 00 14 84 37 08
IMEI svNet : 33 55 69 00 14 84 37 28 F1

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created

SDD key status : Ok
SimLock status : Ok
Security status : Ok
PA_SL3 phone , SP_CODE_LEN : 15

User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method

Done!

05.04.2012, 18:13	#1
sohib Senior Member Регистрация: 22.11.2011 Сообщений: 158 Вес репутации: 36	C7-00 RM-675 белый фон после заливки RPL Всем привет! Подскажите пожалуйста в чем может быть проблема? Во первых стер тело куклоном потом прошил, телефон включился значит нормально стер. Потом заливаю Rpl Bestom потом залил рм но все равно белый фон. Вот логи. Product Code: 059D9Z9 Language Pack: - not available. Detected as PA_SL3 phone. - Avoid SW Downgrade & manual erase to this phone ! SIMLOCK seems to be valid SUPERDONGLE_KEY seems to be valid SIMLOCK_TEST passed SECURITY_TEST passed Imei net: 35xxxxxxxxxxxxx Version: SIMLOCK SERVER Counter: 0/3, 0/10 CONFIG_DATA: 2440700000000000 PROFILE_BITS: 0000000000000000 BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN Вот лог Best Ape Ver : 025.007 APE Var : 025.007025.007.04.01025.007.00.01 APE ADSP: 256 DSP Ver : 92_11w36 APE Test: rm675_ENO_v_0.0491 PPM : CNT : Product SN : 0 Product code : 059D9Z9 Base Prd.code: Module code : Long Prod.SN : 0 Hardware info======= HWID : Retu : 40 Tahvo : 00 Batery: 4658 mV Camera: CMT BT: APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13. APE HW: 256 LCDVer: RF ic : Lock info =========== IMEI : 35xxxxxxxxxxxxx IMEI spNet : 3A 55 69 00 14 84 37 08 IMEI svNet : 33 55 69 00 14 84 37 28 F1 Conf key : 0000000000000000 Provider key : 2440700000000000 Provider : AT&T;U.S.A. (3650) Counters : Key 0 [3] , Fbus 0 [10] Blocks : 7 LOCK STATUS : ============================= BLK : 1 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 2 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 3 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 4 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 5 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 6 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open BLK : 7 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open ============================= LOCKS : All Open ============================= CRT308 Backup Created SDD key status : Ok SimLock status : Ok Security status : Ok PA_SL3 phone , SP_CODE_LEN : 15 User code : Crypted UserDataExLevel : Low [Gallery] , FullFlash method Done! Последний раз редактировалось Server_Support; 05.04.2012 в 18:31.