[zdob]

Сообщение от UO5OQ

После этой последней операции (этого лога), fastboot oem unlock - так же пишет not allowed ?

Да, после этой операции также пишет
\fastboot oem unlock 0xCFF39E54C51AE27D
FAILED (remote: 'Command not allowed')
fastboot: error: Command failed

boot log(newflasher read-ta:2:2050), пробовал еще в flashmode прописать bootloader unlock код в ТА 2226, сразу после анлока, тоже не получается :

S - Format: Log Type - Time(microsec) - Message - Optional Info
S - Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.MXF.1.0-00589-LAHAINA-2
S - IMAGE_VARIANT_STRING=SocLahainaLAA
S - OEM_IMAGE_VERSION_STRING=ip-10-26-16-222
S - Boot Interface: UFS
S - Secure Boot: On
S - Boot Config @ 0x00786070 = 0x00000001
S - JTAG ID @ 0x00786130 = 0x301350e1
S - OEM ID @ 0x00786138 = 0x00780001
S - Serial Number @ 0x00786134 = 0x3dd46605
S - Feature Config Row 0 @ 0x00784148 = 0x0000000000000000
S - Feature Config Row 1 @ 0x00784150 = 0x0000000000000000
S - Core 0 Frequency, 1459 MHz
S - PBL Patch Ver: 3
D - 9308 - pbl_apps_init_timestamp
D - 52796 - bootable_media_detect_timestamp
D - 12040 - bl_elf_metadata_loading_timestamp
D - 25105 - bl_hash_seg_auth_timestamp
D - 37810 - bl_elf_loadable_segment_loading_timestamp
D - 4551 - bl_elf_segs_hash_verify_timestamp
D - 16955 - bl_sec_hash_seg_auth_timestamp
D - 815 - bl_sec_segs_hash_verify_timestamp
D - 26 - pbl_populate_shared_data_and_exit_timestamp
S - 159406 - PBL, End
B - 168268 - SBL1, Start
B - 298564 - SBL1 BUILD @ 10:29:24 on Sep 16 2021
B - 302621 - usb: usb2_rcal , 0xa
B - 305976 - usb: platform
B - 309361 - usb: usb_shared_hs_phy_init: hs phy cfg size , 0xc
B - 317901 - usb: eud_serial_upd , 0x3dd46605
D - 318237 - sbl1_hw_init
B - 513376 - UFS INQUIRY ID: MICRON MT512GAXAT8U31 0102
B - 515541 - UFS Boot LUN: 1
D - 212737 - boot_media_init
D - 0 - smss_load_cancel
B - 538416 - SMSS - Image Load, Start
D - 3020 - SMSS - Image Loaded, Delta - (0 Bytes)
D - 25376 - Auth Metadata
D - 26444 - sbl1_xblconfig_init
B - 573918 - XBL Config - Image Load, Start
D - 0 - shrm_load_cancel
B - 581604 - SHRM - Image Load, Start
D - 24979 - Auth Metadata
D - 1281 - Segments hash check
D - 33520 - SHRM - Image Loaded, Delta - (39808 Bytes)
D - 0 - boot_default_cdt_init
D - 244 - boot_cdt_init
B - 627354 - CDT - Image Load, Start
B - 630130 - CDT Version:3,Platform ID:8,Major ID:2,Minor ID:0,Subtype:0
D - 16561 - sbl1_hw_platform_pre_ddr
D - 0 - devcfg init
B - 656268 - PMIC A:2.0 B:2.2 C:2.2 D:2.0 E:2.3
B - 658098 - PM: Reset by PSHOLD
B - 660904 - PM: Reset Type: Hard Reset
B - 664229 - PM: PON by SYSOK
B - 916159 - PM: SET_VAL:Skip
B - 916464 - PM: PSI: b0x00_v0x81
B - 921832 - PM: Device Init # SPMI Transn: 15134
D - 275872 - pm_device_init, Delta
B - 927413 - pm_driver_init, Start
B - 939522 - no SDI. gcc_reset_status=2
B - 941657 - S3_timer is set to 16sec

B - 943517 - PM: Driver Init # SPMI Transn: 598
D - 16378 - pm_driver_init, Delta
B - 953247 - PM: Battery ID: 15188Ohm
B - 955534 - PM: VBAT: 4347mV IBAT: 443mA
B - 1458906 - PM: VBAT: 4435mV IBAT: -84mA
B - 1459120 - PM: Charger port type: SDP
B - 1962705 - PM: Primary Charging loop exit
B - 1963132 - PM: CHG Init # SPMI Transn: 15833
B - 1967006 - vsense_init, Start
D - 0 - vsense_init, Delta
D - 1366034 - sbl1_hw_pre_ddr_init
D - 0 - boot_dload_handle_forced_dload_timeout
D - 3477 - sbl1_load_ddr_training_data
B - 2021174 - Pre_DDR_clock_init, Start
D - 92 - Pre_DDR_clock_init, Delta
D - 12871 - sbl1_ddr_set_params
B - 2032855 - sbl1_ddr_init, Start
B - 2036271 - LP5 DDR detected
B - 2055303 - eCDT MRR - Data Starting Address: 0x09066D00

D - 56577 - sbl1_ddr_init, Delta
B - 2092818 - DSF version = 247.8.15
B - 2096173 - Manufacturer ID = 1, Device Type = 8
B - 2099772 - Rank 0 size = 6144 MB, Rank 1 size = 6144 MB
B - 2104591 - DDR_INFO:LogVer=0002,type=0008,MR4=0x0000,0x0000,0 x0000,0x0000,MR5=0x01,MR6=0x08,MR7=0x00,MR8=0x14
B - 2115815 - DDR_RANK:LogVer=0002
B - 2120482 - ** sdram0_cs0=1536MB,sdram0_cs1=1536MB
B - 2123867 - ** sdram1_cs0=1536MB,sdram1_cs1=1536MB
B - 2129052 - ** sdram2_cs0=1536MB,sdram2_cs1=1536MB
B - 2134237 - ** sdram3_cs0=1536MB,sdram3_cs1=1536MB
D - 106781 - sbl1_ddr_init
D - 0 - boot_pre_ddi_entry
B - 2147352 - do_ddr_training, Start
B - 2189991 - DDR: Start of DDR Training Restore
B - 2197250 - Current DDR Freq = 1709 MHz
B - 2197281 - Max enabled DDR Freq = 3196 MHz
B - 2201276 - DDR: End of DDR Training Restore
D - 55144 - do_ddr_training, Delta
D - 62983 - sbl1_do_ddr_training
D - 671 - boot_ddi_entry
B - 2217106 - Pimem init cmd, entry
D - 9119 - Pimem init cmd, exit
B - 2229672 - External heap init, Start
B - 2232539 - External heap init, End


UEFI Start [ 2994]
- 0x09FC01000 [ 2998] Sec.efi
ASLR : ON
DEP : ON (RTB)
Timer Delta : +2 mS
RAM Entry 0 : Base 0x0080000000 Size 0x0037500000
RAM Entry 1 : Base 0x0200000000 Size 0x0180000000
RAM Entry 2 : Base 0x00C0000000 Size 0x0140000000
RAM Entry 3 : Base 0x00B9900000 Size 0x0000000000
Total Available RAM : 12149 MB (0x02F7500000)
Total Installed RAM : 12288 MB (0x0300000000)
Multithread : ON (Lib ver 1.2)
CPU Cores : 8 (init 2)
Init 1 aux cores of 7
Init CPU core 1
> Scheduler up on Core 1
CONF File : uefiplatLA.cfg
UEFI Ver : 6.0.210916.BOOT.MXF.1.0-00589-LAHAINA-2
Build Info : 64b Sep 16 2021 10:29:57
Boot Device : UFS
PROD Mode : FALSE
Retail : TRUE
- 0x09ECC8000 [ 3057] DxeCore.efi
Loading DxeCore at 0x009ECC8000 EntryPoint=0x009ECC9000
HOBLIST address in DXE = 0x9EAB9018
FV Hob 0x9FC00000 - 0x9FEFFFFF
FV Hob 0x9ED07000 - 0x9F0AFFFF
FV2 Hob 0x9ED07000 - 0x9F0AFFFF
631008B0-B2D1-410A-8B49-2C5C4D8ECC7E - 00000000-0000-0000-0000-000000000000
- 0x09EC45000 [ 3060] XHwresetDxe.efi
- 0x09EC3E000 [ 3060] MazeDetDxe.efi
- 0x09EC65000 [ 3061] EnvDxe.efi
- 0x09EC5B000 [ 3061] RscRtDxe.efi
- 0x09EC53000 [ 3061] SCHandlerRtDxe.efi
- 0x09E78D000 [ 3061] RuntimeDxe.efi
- 0x09EC31000 [ 3061] ArmCpuDxe.efi
- 0x09EC28000 [ 3062] ArmGicDxe.efi
- 0x09EC21000 [ 3062] MetronomeDxe.efi
- 0x09EC19000 [ 3063] ArmTimerDxe.efi
- 0x09EC0F000 [ 3063] SmemDxe.efi
- 0x09EBAE000 [ 3063] DALSys.efi
- 0x09EBA6000 [ 3064] HWIODxeDriver.efi
- 0x09EB9B000 [ 3064] ChipInfo.efi
- 0x09EB93000 [ 3064] PlatformInfoDxeDriver.efi
- 0x09EB86000 [ 3064] HALIOMMU.efi
- 0x09EB72000 [ 3065] ULogDxe.efi
- 0x09EB6A000 [ 3065] CmdDbDxe.efi
- 0x09EB62000 [ 3065] PwrUtilsDxe.efi
- 0x09EB50000 [ 3066] NpaDxe.efi
- 0x09EB40000 [ 3066] RpmhDxe.efi
- 0x09EB34000 [ 3067] VcsDxe.efi
- 0x09EB05000 [ 3067] ClockDxe.efi
>>> Cluster 0: 1497600000 Hz
>>> Cluster 2: 1248000000 Hz
- 0x09EAF8000 [ 3075] ICBDxe.efi
- 0x09EAEF000 [ 3078] ShmBridgeDxeLA.efi
- 0x09EAE0000 [ 3078] ScmDxeLA.efi
- 0x09EAD5000 [ 3080] DiskIoDxe.efi
- 0x09EAC8000 [ 3081] PartitionDxe.efi
- 0x09EAC0000 [ 3081] EnglishDxe.efi
- 0x09E782000 [ 3081] FvSimpleFileSystem.efi
- 0x09E761000 [ 3081] UFSDxe.efi
UFS INQUIRY ID: MICRON MT512GAXAT8U31 0102
UFS Boot LUN: 1
- 0x09D230000 [ 3109] Fat.efi
- 0x09D221000 [ 3110] TzDxeLA.efi
- 0x09D190000 [ 3112] VariableDxe.efi
LoadSecureApps: Load app from partition(tzxflattest): Status = 0x0, AppId = 2
<VariablePolicyInitialize:179> variable policy engine disabled
- 0x09E401000 [ 3326] QcomWDogDxe.efi
HW Wdog Setting from PCD : Disabled
- 0x09CF5D000 [ 3327] ResetRuntimeDxe.efi
- 0x09CF55000 [ 3328] XGAdcDxe.efi
- 0x09E409000 [ 3328] WatchdogTimer.efi
- 0x09CF3A000 [ 3328] SecurityStubDxe.efi
- 0x09CF4D000 [ 3328] EmbeddedMonotonicCounter.efi
- 0x09CF66000 [ 3329] RealTimeClock.efi
- 0x09CF13000 [ 3330] DevicePathDxe.efi
- 0x09CF29000 [ 3330] CapsuleRuntimeDxe.efi
- 0x09CECC000 [ 3331] HiiDatabase.efi
- 0x09CF31000 [ 3331] FontDxe.efi
- 0x09CDDF000 [ 3336] QcomBds.efi
- 0x09CE99000 [ 3344] VerifiedBootDxe.efi
- 0x09CEB9000 [ 3345] DALTLMM.efi
- 0x09CEC2000 [ 3345] I2C.efi
- 0x09CE73000 [ 3345] SPMI.efi
- 0x09CDBC000 [ 3350] PmicDxe.efi
PM0: 47, PM1: 48, PM2: 49, PM3: 50, PM4: 51,
app_pshold_cfg change: DVDD_SHUTDOWN -> NORMAL_SHUTDOWN
Module cannot re-initialize DAL module environment
- 0x09CE23000 [ 3374] SdccDxe.efi
- 0x09CE47000 [ 3375] DDRInfoDxe.efi
- 0x09CE3F000 [ 3377] FeatureEnablerDxe.efi
QseeResponse->result = 0xFFFFFFFF
Status = 0x7
QseeResponse->result = 0xFFFFFFFF
Status = 0x7
Image partition label not found
EFI_QseecomStartApp: Load from partition (featenabler_a)Failed: Status(0x800000000000000E), appId(0)
QseeResponse->result = 0xFFFFFFFF
Status = 0x7
QseeResponse->result = 0xFFFFFFFF
Status = 0x7
Image partition label not found
EFI_QseecomStartApp: Load from partition (featenabler)Failed: Status(0x800000000000000E), appId(0)
Image partition label not found
LoadImageFromPartitionUsingGuid Failed: 14
EFI_QseecomStartApp: Load Failed: Status(0x800000000000000E)
Failed to start featenabler_a TA, status = 14
- 0x09CD17000 [ 3382] DisplayDxe.efi
- 0x09CD97000 [ 3383] FvDxe.efi
- 0x09CDB3000 [ 3384] PILProxyDxe.efi
- 0x09CCFB000 [ 3384] PILDxe.efi
pil-abl Done t=87ms s=1ms a=45ms f=38ms
- 0x09CD7E000 [ 3557] SPSSDxe.efi
SPSSDxe [spss_iar_main] I: IAR-STATE is NOT ACTIVATED [0x0], Exit now
Overriding PIL cfg by caller
pil-SPSS Failed to get MDT size
pil-SPSS Failed to load metadata
pil-SPSS Failed to boot subsys
SPSSDxe:: SPSSDxe_LoadSPSS ProcessPilImageExt = Load Error
Error: Image at 0009CD7E000 start failed: Load Error
- 0x09CD7D000 [ 3567] IPCCDxe.efi
- 0x09CCAC000 [ 3567] GlinkDxe.efi
smem_alloc_ex: SMEM alloc_ex failed with err=-3! smem_type=478, remote=13, size=32, flags=0x40000000. - 0x09CD75000 [ 3568] PrintDxe.efi
- 0x09CCA2000 [ 3569] SPI.efi
- 0x09CD69000 [ 3569] PmicGlinkDxe.efi
- 0x09CC8D000 [ 3570] UsbPwrCtrlDxe.efi
- 0x09CC4E000 [ 3570] QcomChargerDxeLA.efi
QcomChargerDxe:: ChargerPlatform_Init Enabled WDOG.
- 0x09CC85000 [ 3591] ChargerExDxe.efi
- 0x09CC1B000 [ 3591] UsbfnDwc3Dxe.efi
- 0x09CC97000 [ 3592] XhciPciEmulation.efi
- 0x09CC37000 [ 3592] XhciDxe.efi
- 0x09CC09000 [ 3593] UsbBusDxe.efi
- 0x09CBFC000 [ 3594] UsbKbDxe.efi
- 0x09CBF0000 [ 3594] UsbMassStorageDxe.efi
- 0x09CBD9000 [ 3595] UsbConfigDxe.efi
InitUsbClocks: ClockProtocol unavailable
UsbConfigLibOpenProtocols: PMI version (0x30)
UsbConfigLibOpenProtocols: PMI version (0x30)
UsbConfigInit: UsbConfigInit, not start on port: 0, mode 0
UsbConfigInit: UsbConfigInit, not start on port: 1, mode 0
UsbConfigInit: UsbPwrCtrl No. of Ports = 1

UsbConfigPortsQueryConnectionChange: usbport->connectstate: ATT
HandlePortPartnerXtach: Cable Attach core 0, portmode 1, dualmode 1
- 0x09CC70000 [ 3599] ButtonsDxe.efi
ButtonsDxeTest: Keypress SDAM data payload 0
- 0x09CBB6000 [ 3600] CPRDxe.efi
- 0x09CB8B000 [ 3620] GpiDxe.efi
- 0x09CA3B000 [ 3718] UCDxe.efi
- 0x09CB83000 [ 3724] RngDxe.efi
- 0x09CB7B000 [ 3725] SimpleTextInOutSerial.efi
- 0x09CA6D000 [ 3726] ConPlatformDxe.efi
- 0x09CA2D000 [ 3727] ConSplitterDxe.efi
- 0x09CA21000 [ 3728] GraphicsConsoleDxe.efi
- 0x09CA17000 [ 3729] ASN1X509Dxe.efi
- 0x09CA0D000 [ 3729] SecRSADxe.efi
- 0x09CA77000 [ 3730] XResetReasonDxe.efi
invalid last_log info
- 0x09CA01000 [ 3730] TaDxe.efi
- 0x09C9F9000 [ 3731] XOemCertDxe.efi
- 0x09C9EE000 [ 3731] XBootPALDxe.efi
- 0x09C9E6000 [ 3732] XProductIdDxe.efi
- 0x09C9DA000 [ 3732] UdonDxe.efi
- 0x09C9B9000 [ 3733] XGraphicImagesDxe.efi
- 0x09C9B1000 [ 3804] XPmicAccessDxe.efi
- 0x09C9A9000 [ 3805] ResetCfgDxe.efi
- 0x09C9CA000 [ 3805] MinidumpTADxe.efi
smem_get_addr: SMEM get addr failed! smem_type=628MinidumpTADxe: Minidump TA loading not enabled.
Error: Image at 0009C9CA000 start failed: Load Error
- 0x09C9A1000 [ 3810] TsensDxe.efi
- 0x09C986000 [ 3813] UsbMsdDxe.efi
- 0x09C979000 [ 3814] UsbDeviceDxe.efi
- 0x09C971000 [ 3814] UsbInitDxe.efi
- 0x09C968000 [ 3815] ParserDxe.efi
- 0x09C961000 [ 3816] SerialPortDxe.efi
BDS Entry [ 3816]
Disp init wait [ 3816]
rtc raw 541
-----------------------------
Platform Init [ 3828] BDS
Boot Cycle : 43903
Run Cycle : 43903
UEFI Ver : 6.0.210916.BOOT.MXF.1.0-00589-LAHAINA-2
Platform : MTP
Subtype : 0
Boot Device : UFS
Chip Name : SM_LAHAINA
Chip Ver : 2.1
Chip Serial Number : 0x3DD46605
Boot Core : 1497 MHz
-----------------------------
- 0x09C916000 [ 3848] QcomChargerApp.efi
QcomChargerDxe:: ChargerPlatform_ChkChgFwLoadRequired Chg Fw Load not required boot to HLOS
ChargerLib:: no Turn Off LED
UEFI Total : 859 ms
POST Time [ 3853] OS Loader
- 0x09C7B0000 [ 3857] LinuxLoader.efi
Loader Build Info: Sep 16 2021 10:32:41
QseeResponse->result = 0xFFFFFFFF
Status = 0x7
VB: RWDeviceState: Succeed using rpmb!
Boot counter is 44339
XBoot Init
Init XBootPALAPILib
Init TA API Lib
XBOOT (1322-1669_X_Boot_SM8350_LA1.0_R_31)
Reading 325 bytes from RPMB, OK
Reading 325 bytes from RPMB, OK
Reading 325 bytes from RPMB, OK
VB: RWDeviceState: Succeed using rpmb!
Bootloader unlock not allowed
XBoot MakeDecisions
Check authenticated commands
[ERROR @ ta_interface.c:343]:
Unable to delete TA unit 2334
Make Decisions
PBA ID: V5034977A (1)
Vendor(0x00000060)->Sony(0x6F656D53)
Setting existing handle
Startup flags: [USB INSERTED] [HARD RESET]
Warmboot reason: [SONY SERVICE]
[ERROR @ sony_boot_config_parser.c:740]:
None or incorrect vbus_pulse configuration!
hwid0[1] hwid1[0] (productId:1)
Reset keys pressed but released before shutdown timer expired. Booting normally.
SW service triggering key detected
Service mode detected: [SONY - USB]
Collect command line additions
Obtain backlight config
Verify OEM unlock flag Request
Generate authenticated channel nonce
Reading 325 bytes from RPMB, OK
Writing 325 bytes to RPMB OK
Booting Into Xperia Service
Enable XHwreset
S2 reset is enabled
Setting existing handle
Total DDR Size: 0x00000002F7500000
A/B retry count NOT decremented
Booting from slot (_a)
LoadImageAndAuth: 1747: CurrentSlot.Suffix=_a
Load Image vbmeta_a total time: 1 ms
Load Image vbmeta_system_a total time: 1 ms
Load Image boot_a total time: 43 ms
Load Image dtbo_a total time: 5 ms
Load Image vendor_boot_a total time: 3 ms
Reading 325 bytes from RPMB, OK
Reading 325 bytes from RPMB, OK
VB: RWDeviceState: Succeed using rpmb!
Reading 325 bytes from RPMB, OK
Writing 325 bytes to RPMB OK
Launching fastboot
Fastboot Build Info: Sep 16 2021 10:32:39
UsbStartController: Starting Core 0 in mode: 4
UsbStartController: GetUsbAlwaysConnect failed on Core 14: Success
SSUsb1InitCommon: gNpaClientSS1Bus is NULL)
usb2_rcal: 10
platform: 8
usb_shared_hs_phy_init: hs phy cfg size: 12
usb_shared_ss_phy_init: ss phy cfg size: 155
ssusb_phy_init_success_lane_B: 1
ConfigUsb: CoreNum 0, Mode 4, USB_INIT_DONE 1
Fastboot: Initializing...
Reading 325 bytes from RPMB, OK
Fastboot: Processing commands
FastbootInitialize: 413: Vbus=1
UsbfnDwcCoreCableStatus: Cable Attached
Dev_Common_Speed: Dev Bus Speed: High, state 2
Handling Cmd: Get-root-key-hash
Handling Cmd: getvar:Loader-version
Handling Cmd: getvar:Phone-id
Handling Cmd: getvar:Device-id
Handling Cmd: getvar:Rooting-status
Reading 325 bytes from RPMB, OK
Reading 325 bytes from RPMB, OK
Handling Cmd: getvar:Sector-size
Handling Cmd: getvar:Ufs-info
Handling Cmd: getvar:Emmc-info
[ERROR @ fastboot_utils.c:743]:
fastboot_get_variable: Could not find variable Emmc-info
Emmc-info not supported
Handling Cmd: getvar:Default-security
Handling Cmd: getvar:Platform-id
Handling Cmd: getvar:Keystore-counter
Reading 325 bytes from RPMB, OK
Handling Cmd: getvar:Security-state
Reading 325 bytes from RPMB, OK
Handling Cmd: getvar:S1-root
Handling Cmd: getvar:Sake-root
Reading 325 bytes from RPMB, OK
Handling Cmd: getvar:Battery
Handling Cmd: getvar:Frp-partition
Handling Cmd: getvar:Stored-security-state
Reading 325 bytes from RPMB, OK
Handling Cmd: getvar:Keystore-xcs
Reading 325 bytes from RPMB, OK
Handling Cmd: getvar:X-conf
Handling Cmd: getvar:Soc-unique-id
read_suid_data Soc-unique-id not supported on QC platform
[ERROR @ fastboot_utils.c:580]:
Failed to read suid from RPMB (-1004)
Soc-unique-id not supported
Handling Cmd: getvar:version-bootloader
Handling Cmd: getvar:serialno
Handling Cmd: Read-TA:2:2129
Handling Cmd: Read-TA:2:2010
Handling Cmd: Read-TA:2:2003
Handling Cmd: download:00000278
Download Finished
Handling Cmd: Write-TA:2:2010
Handling Cmd: download:00000004
Download Finished
Handling Cmd: Write-TA:2:2128
Handling Cmd: download:000003CA
Download Finished
Handling Cmd: Write-TA:2:2129
Handling Cmd: powerdown
Handling Cmd: Read-TA:2:2050
Handling Cmd: Read-TA:2:2050
Handling Cmd: getvar:max-download-size
Handling Cmd: getvar:product
Handling Cmd: getvar:version
Handling Cmd: getvar:version-bootloader
Handling Cmd: getvar:version-baseband
Handling Cmd: getvar:serialno
Handling Cmd: getvar:secure
Handling Cmd: getvar:Sector-size
Handling Cmd: getvar:Loader-version
Handling Cmd: getvar:Phone-id
Handling Cmd: getvar:Device-id
Handling Cmd: getvar:Platform-id
Handling Cmd: getvar:Rooting-status
Reading 325 bytes from RPMB, OK
Reading 325 bytes from RPMB, OK
Handling Cmd: getvar:Ufs-info
Handling Cmd: getvar:Emmc-info
[ERROR @ fastboot_utils.c:743]:
fastboot_get_variable: Could not find variable Emmc-info
Emmc-info not supported
Handling Cmd: getvar:Default-security
Handling Cmd: getvar:Keystore-counter
Reading 325 bytes from RPMB, OK
Handling Cmd: getvar:Security-state
Reading 325 bytes from RPMB, OK
Handling Cmd: getvar:S1-root
Handling Cmd: getvar:Sake-root
Reading 325 bytes from RPMB, OK
Handling Cmd: Get-root-key-hash
Handling Cmd: getvar:slot-count
Handling Cmd: getvar:current-slot
Handling Cmd: getvar:Battery
Handling Cmd: download:00000001
Download Finished
Handling Cmd: Write-TA:2:10100
Handling Cmd: download:00000010
Download Finished
Handling Cmd: Write-TA:2:2226
Handling Cmd: Read-TA:2:2475
Handling Cmd: set_active:a
SetActiveSlot: _a already active slot
Handling Cmd: download:00000001
Download Finished
Handling Cmd: Write-TA:2:10100
Handling Cmd: Sync
XCmdSync()
Handling Cmd: reboot-bootloader
Rebooting the device into bootloader mode

INFO: Received ResetSytem request.
INFO: Type :0x0
INFO: DataSize :0x19
INFO: String :RESET_PARAM Length: 0x18

Start EBS [71311]
UsbfnDwcCoreCableStatus: Cable Detached
BDS: LogFs sync skipped, Unsupported