User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 0AB001048FBF0D49ADFB37017532CE4D6F03C151
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
ADL: Preparing for erase...
Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:01
ADL: Erase done
ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!
Connect phone on selected interface...
Core version : 1.30 Rev : 1.1
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm645_071.005_prd.core.fpsx
PPM : rm645_071.005_05.01_Russian_prd.rofs2.fpsx
PPM2 : rm645_071.005_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm645_071.005_U000.000_prd.uda.fpsx
APE : RM645_ENO_10wk48v0.001.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 0AB001048FBF0D49ADFB37017532CE4D6F03C151
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
===Flashing [MCU]===
Erase : Processing rm645_071.005_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm645_071.005_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 411 blocks
TIME : Write time : 00:00:15
MCU Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
===Flashing [PPM]===
Erase : Processing rm645_071.005_05.01_Russian_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_071.005_05.01_Russian_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 180 blocks
TIME : Write time : 00:00:06
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
===Flashing [PPM2]===
Erase : Processing rm645_071.005_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_071.005_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
===Flashing [CNT]===
Erase : Processing rm645_071.005_U000.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_071.005_U000.000_prd.uda.fpsx
Total writen 6 blocks
TIME : Write time : 00:00:00
CNT Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
===Flashing [APE]===
Erase : Processing RM645_ENO_10wk48v0.001.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM645_ENO_10wk48v0.001.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 10 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:25
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia C5-00
Software Info: V ICPR82_11w16.4 02-06-11 RM-645 (c) Nokia
IMEI: 12345610654321?
Ape Version: 071.005
Product code:
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
AfterFlash operations done ;D
Done!
Elapsed: 00:00:40
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
-> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Writing SimLock Key... Error!
Writing SimLock Data... Error!
Writing Super Dongle Key... Ok!
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
Write CMLA... Error
WMDRM_PD key sent... Ok
Done!
Connect phone on selected interface...
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 0AB001048FBF0D49ADFB37017532CE4D6F03C151
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
ADL: Preparing for write certificates...
Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok
ADL: Writing Flash certs done!
ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
Wait, reconneting...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok!
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
Write CMLA... Error
WMDRM_PD key sent... Ok
Done!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Processing Server SX4 Auth
Checking SDD key...
Check SD : Key is Ok
Operating mode is OK, no need change...
Connecting to server...
Connect to server Ok, checking
SX4 Server : Online, ver:1.04 , Infinity Team (c) 2011
SX4, processing Step #1
SX4, processing Step #2
SX4, processing Step #3
SX4 Result : Ok
Upload PM checked
Uploading RF/Battery tune to phone...
Using : RM-645.pm
Operating mode is OK, no need change...
Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Field 2
Record 0 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 7 write - Ok
Record 17 write - Ok
Check ST_SECURITY now...
Security status : ST_SECURITY => DAMAGED
- > Try different PM files or "Restore CCC/HWC" option
Done!
Elapsed: 00:00:02
Upload done
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone detected , SP_CODE_LEN : 15
Done!
Phone disconected!
Connect phone on selected interface...