[UO5OQ]

Извините, некогда переводить на русский. Надеюсь разберётесь.

What we need
------------
1. I300 or I320 handset with FULLY CHARGED BATTERY !!!
2. I300 or I320 cable (RJ-45 + USB)
3. Working UFS.
4. Installed PDA Flash v1.2 utility and USB drivers.

Phone Flashing
--------------
1. ATTACH BATTERY.
2. Connect RJ45 to UFS (USB CABLE MUST BE DISCONNECTED !!!)
3. Press "Write Flash"
4. Phone will start-up (PDA) and flash process will start aprox. in 30sec.

PDA Flashing
------------
1. ATTACH BATTERY.
2. Run PDA Flash v1.2 utility.
3. Choose file: "chain.lst"
4. Connect USB cable.
5. Connect RJ-45 to UFS.
6. PDA Flash v1.2 utility will display: "Device Connected"
7. Start Download and enjoy progress bars.
8. When finished, disconnect cables (for I320 wait for format finish)
9. Attach battery, Hold '0' button and switch-on phone.
10. Enter password: 1234, phone will perform initialization and format.

User Interface functions
------------------------
1. ATTACH BATTERY.
2. connect RJ-45 to UFS.
3. Wait till phone starts.
4. Now can do something...

Notes
-----
1. If phone is in "Flight mode", press and hold right side button with phone icon.
2. Sometimes PDA Flash v1.2 wont flash all files, so can flash files separatelly...
3. I300 cable is different than D720/D730 !!!