Connect phone on selected interface...
Core : v1.99 , BB5XG FlashEngine : v9.9
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm469_052.003_prd.core.fpsx
PPM : rm469_052.003_05.01_Russian_prd.rofs2.fpsx
PPM2 : rm469_052.003_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : RM469_ENO_09w23v0.a078.01.fpsx
APE : rm469_052.003_U007.000_prd.uda.fpsx
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 2B4001087E8803449BB69BA3B55022D55B5D0DB4
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
=== SW Version Check ===
- > Can not collect initial info, continue flashing...
- > Hope, this version will be ok
=== SW Version Check ===
===Flashing [MCU]===
Erase : Processing rm469_052.003_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_052.003_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 428 blocks
TIME : Write time : 00:00:25
MCU Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
===Flashing [PPM]===
Erase : Processing rm469_052.003_05.01_Russian_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_052.003_05.01_Russian_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 166 blocks
TIME : Write time : 00:00:10
PPM Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
===Flashing [PPM2]===
Erase : Processing rm469_052.003_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_052.003_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 32 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
===Flashing [CNT]===
Erase : Processing RM469_ENO_09w23v0.a078.01.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM469_ENO_09w23v0.a078.01.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 12 blocks
TIME : Write time : 00:00:00
CNT Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
===Flashing [APE]===
Erase : Processing rm469_052.003_U007.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_052.003_U007.000_prd.uda.fpsx
Total writen 15 blocks
TIME : Write time : 00:00:01
APE Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
ADL: Close_Session
Content: 000300000000040000000400000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:41
Reboot phone now...
Afterflash not selected, skip
Done!
Phone disconected!
Connect phone on selected interface...
Elapsed: 00:00:52
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Connect phone on selected interface...
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SIMLOCK Data found!
SIMLOCK KEY found!
SUPERDONGLE KEY found!
CMLA KEY found!
WMDRM KEY found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 2B4001087E8803449BB69BA3B55022D55B5D0DB4
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 85F252E351E225CAFC4DFBC8041EABD2823E3500
ADL: Preparing for write certificates...
Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok
ADL: Writing Flash certs done!
ADL: Close_Session
Content: 000300000000040000000400000000
ADL: Reboot
Wait, reconneting...
Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok!
Product Code Update : 0578053
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
Write CMLA... Error
WMDRM_PD key sent... Ok
Done!
Connect phone on selected interface...
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Done!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Done!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Done!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Done!