nokia lumia 800 dead boot
================================================== ====
================================================== ====
Lumia Test Point Connection Module
================================================== ====
================================================== ====
1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
Interface Reset OK!
Reading Platform Information...
Selecting Active Handle...
Select Handle OK!
Sending Ping...
Ping Reply OK!
BYTES_MISSING
ERROR: Connection Refused 0x06
Check your Test Point Soldering!
Total Elapsed Time 00:00:11
подрубаю через теспоинт такой лог ^
на БП потребление 33 мА
припаялся правильно поскажите что может быть
__________________
ATF,Z3X,INFINITY,BEST,UFS.
|