[sabotaj]

пробовал не помогает сщас попробовал на MX через F-BUS вот лог

mei: 35698004093315
Updating SIMLOCK(PA_SL3)...error 0x17
Trying to write SIMLOCK as PM(PA_SL3)...OK
Updating WMDRM_PD ...OK
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 2], SN: C08227B0
Using device: HTI, FW ver: 00.50, SN: 000097AF
Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.21313(12-12-2012), Library ver: 1.0.0.14337(12-12-2012)
CMT Data :
SYSTEM ASIC ID: 000000030000022600010007600C192102031104 [RAPUYAMA ver: 1.1]
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 1E60021270DA0344DC0AC9534747E8CAC040A5F9
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 9.50.0 revision: 3.0 size: 0x3A40
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0020 0050 - 0000 0031 [ST ] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Not supported flash chip, please disable "Use New Protocol for RAP3GV3" in config

Phone type: RM-632 (Nokia E5-00)
SW version: V ICPR82_10w18.16.3 06-12-10 RM-632 (c) Nokia
Imei plain: 12345610654321-?
Battery voltage: 4648 mV, current: 104 mA
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !

SIMLOCK invalid!
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei plain is invalid !!!
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!