При востановлении NPC IMEI показывает только в логе при считывании инфо.
А телефон включается и после заставки нокиа пишет ошибка самотестирования.
лог востановления NPC
Код:
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 26200217F7DC03442FDD9D537AC049A64CB54B81
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00680020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02
ADL: Preparing for write certificates...
Erase NPC... Ok
Writing NPC... Ok
ADL: Writing Flash certs done! :)
ADL: Close_Session
Content: 000300000000070000000700000000
ADL: Reboot
-> No any Flex keys selected, skip flex part
Done!
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Нужно заказывать RPL Думаю что он решит все эти проблемы.