Новая программа NTool от SETool Unlock bootloader, Repair, FRP Reset, Simunlock Nokia
 

Для работы с программой нужны кедиты setool:
1 кредит для прошивки;
1 кредит для разблокировки загрузчика.

Список поддерживаемых смартфонов:
Nokia 1 (Frontier)
Nokia 2 (Dynamo)
Nokia 3 (Essential)
Nokia 5 (Core)
Nokia 6 (Plate)
Nokia 6 (Plate2 2018)
Nokia 7 (Charm)
Nokia 7 Plus (Onyx)
Nokia 8 (Avenger Sirocco)
Nokia 8 (Bang)
скачать

The new tool for Nokia/HMD!
Anyone with setool2 credits can test NTool:

• 1 credit for flashing
• 1 credit for bootloader unlock generation

Supported HMD smartphone:

• Nokia 1 (Frontier)
• Nokia 2 (Dynamo)
• Nokia 3 (Essential)
• Nokia 5 (Core)
• Nokia 6 (Plate)
• Nokia 6 (Plate2 2018)
• Nokia 7 (Charm)
• Nokia 7 Plus (Onyx)
• Nokia 8 (Avenger Sirocco)
• Nokia 8 (Bang)

Supported functions:

• flashing of original .NB0 files or original unpacked .NB0
  !!! make sure you using proper firmwares for your phone model !!!
• FRP reset
• bootloader unlock signature generation (also available remote bootloader unlock for customers via IMEI and serial!)
  !!! make sure you double check IMEI and SERIAL NUMBER BEFORE REQUEST !!!

Instructions to use bootloader unlock signature:
install fastboot drivers for phone.
power off phone.
run
fastboot flash unlock [signature file]
connect phone to cable
run
fastboot oem unlock-go
follow instructions on phone display if any

Notes:
- EDL and BROM boot repair not supported yet, it is planned in next full release versions - so carefully check firmwares and not remove cable during procedure.
- ALWAYS connect powered off phone!!!
If phone in FASTBOOT mode - connect phone to cable, start operation, then press and hold volume up + power buttons until phone restart!!!

Re: Новая программа NTool от SETool Unlock bootloader, Repair, FRP Reset, Simunlock N
 

NTool version 0.025 released!
New features: - Support for IMEI/MAC/BT repair of Nokia 2, Nokia 5, Nokia 6, Nokia 6.1, Nokia 7, Nokia 7 plus, Nokia 8 Sirocco added.
Quick NTool operation instuctions: - Make sure you do not have any other applications, which can use ADB, like samsung companion or other tools
- Install NOKIA HMD drivers from Drivers folder (this should be done once, of course)
- Press the "SERVICE" button
- Connect POWERED OFF phone
- Wait, until the "WRITE" button will appear, correct IMEI/MAC/BT addresses and press the "WRITE" button
- Do not do anything on phone during process!

Credits consumption: - 1 credit for flashing/service (charged once for one phone)
- 1 credit for bootloader unlock generation (charged each time)

Known issues: If NTool will "stuck" on step "reboot to factory mode" and there is no device appear in device manager, reflash phone with firmware from support area.